iPR-9
The iPR-9 reader is a reader and touchpad keypad combined in the same rugged housing. It is fully sealed against the environment
with high quality polyurethane resin and has a wide operating temperature range, making it ideal for outdoor use even under the most
extreme conditions. The iPR-9 reader is purposed for use in access control systems designed for RS232, Wiegand 26, Wiegand 37,
Wiegand 42, standard Wiegand. It has high RF and voltage ripple immunity and complies with the CE marking.
The reader operates with amplitude modulation (ASK) proximity cards and tags. The built-in keypad allows entering of ID code, by
pressing the keys. The code length can be up to 10 digits long in package mode.
Specifications
Power Supply
Material
Climatic
Dimensions
Read range
The read range depends on the ID tag type (see table below, measurements were performed with EM-Marine tags):
| Read range (mm from the reader surface) | ||
| EM04 Card | EM05 Card | EM06 Card |
| 100 | 105...200 | 100 |
EM04 - 1 mm thin card with H4001 EM-Marine chip.
EM05 - Clamshell 1.6mm thick card with H4001 EM-Marine chip.
EM06 - Standard ISO plastic card with H4001 EM-Marine chip.
Ordering information:
iPR -MCIOA
- M - modulation type
- C - Type of housing
- 2 - Slim housing
- 3 - Vandal resistant housing
- 5 - Reader with keypad
- 6 - Miniature plastic housing
- 7 - Reader with keypad in OEM housing
- 8 - Slim housing
- 9 - Reader with keypad in slim housing
- 3 - Vandal resistant housing
- IO - interface variant
- W2 - Wiegand 26
- W3 - Wiegand 37
- W4 - Wiegand 42
- RS - RS232
- W3 - Wiegand 37
- A - Annunciation variant - 0 ...8
Example:
iPR-A5W48 - proximity reader for ASK modulation in housing No 5, interface
- Wiegand 42, annunciation - external control inverts buzzer, RED and
Green LED's. Although reader type is set during the manufacturing, it
may be changed by the programming with computerised programmer and "Reader
Programmer and Programming Utility"